How To Hit A Cart Without A Battery

If you find yourself without a vape pen battery, there are a few methods to activate your vape cartridge using alternative power sources. However, it's important to exercise caution, as these methods can be risky and may damage your cartridge.

Using an Android Charger Cord:

1. Prepare the Cable: Obtain an old Android charging cable. Cut off the end that connects to your phone, exposing the internal wires. Strip back the outer insulation to reveal the red (positive) and black (negative) wires.

2. Connect to the Cartridge: Insert the stripped end of the black wire into the small hole at the bottom of the vape cartridge. Touch the exposed red wire to the metal exterior of the cartridge.

3. Power Up: Plug the USB end of the cable into a powered USB port, such as a laptop or power bank. The cartridge should activate, allowing you to take a hit. Unplug the cable when you're done to prevent overheating.

   
   

Using a Laptop USB Port:

1. Prepare the Cable: Use the same method as above to prepare an Android charger cord.

2. Connect to the Cartridge: Insert the black wire into the cartridge's bottom hole and touch the red wire to the metal exterior.

3. Power Up: Plug the USB end into a powered USB port on your laptop. The cartridge should activate, allowing you to take a hit. Unplug the cable when you're done.

   
   

Important Considerations:

• Safety First: Always ensure the USB cable is unplugged when preparing it. Exposed wires can pose a risk of electric shock or short circuits.

• Avoid Wall Chargers: Do not plug the USB cable into a wall charger, as they provide higher voltage that can damage your cartridge or pose a fire risk.

• Temporary Solution: These methods are temporary and not recommended for regular use. It's best to obtain a proper vape pen battery for safe and reliable operation.

For a visual demonstration of this process, you can watch the following video: